Electric Bicycle Kit 48V 1000W Rear Wheel E Bike Motor Conversion Hub LCD Meter
-
This Electric Bicycle kit
includes everything needed(except battery) to convert your standard bike
into a top-of-the-line performance electric bike, which delivers unequaled
performance and reliability. You’ll be out cruising along at 28 mph without
a sweat!
Feature:
-
Built to the highest
international standards -
48V 1000W and 750W super power
brushless gearless hub motor -
Restricted to 750W and 24 mph by
default as a road-legal kit -
Nylon tire& alloy rim& galvanized
steel spoke -
Rare-earth metal magnet are used
in the motor to efficiently produce large power -
Aluminum alloy powerful
controller guarantee big current supply -
Adjustable 5 level intelligent
pedal assist with twis-t throttle -
LCD display shows battery level
and pedal assistance settings -
Brake Levers cut off the power
supply to the motor safely -
Crank speed sensor for 8 Point
High Efficent Pedal Assist -
Aluminum alloy powerful
controller -
Upgraded Intelligent Motor
Controller: -
Allow you to swap two power modes
between the full 1000W power or 750W power by a single blue switch wire is
embedded in controller. -
(Only for Twis-t Throttle)
-
Still remain the full 1000W power
with no speed control.(Only for Pedal Assist System,”PAS”)
Specification:
-
Wheel type: Rear Wheel
-
Voltage: 48V
-
Power: 1000W
-
Motor: Brushless Gearless
-
Rim: Double Wall Alloy
-
Power: 1000W / 48V or 750W / 48V
-
Tire: Nylon
-
Spokes: Steel, 12G×2.6mm
-
Wheel Size: 26″
-
Max speed: 28 mph or 24 mph
-
Max load capacity: 200kg
-
Net weight:11.16kg
-
Net weight of motor: 6-6.5kg
-
Net weight of motor: 6.5-7kg
-
Wheel Axle: 210 x Φ10mm
-
Motor diameter: 243mm
-
Motor shaft diameter: M14
-
Motor shaft length: 153 mm
-
Motor cable length: 120cm
-
Number of Hall sensors: 3
-
Rated speed: 330 rpm
-
Torque: 45 N.M
-
Width requirement of flat fork:
min.90mm -
Brake: V brake
-
Corresponding controller:
48v1000w controller
The Package Include:
-
1x Brushless Gearless Motor Rear
Wheel -
1x Intelligent Motor Controller
-
1x Pedal Assist Crank Sensor
-
1x Cable Ties & Plastic Coil
-
1x Pair of Handle Bars (included
Twis-t Throttle) -
1x Controller Bag
-
1x Pair of Brake Handles
-
1x LCD Meter
-
1x Manual
Note:
-
Applicable to two wheel bicycles,
not three wheel or multi wheel bicycles -
The system requires a 48 Volt
electrokinetic cell battery with a nominal capacity not less than 11.6Ah -
Battery and charger are not
included in package -
The US regulations dictate that a
kit must not exceed the rated power of 750W to be road-legal
Reviews
There are no reviews yet.